lab vertical sand pump

Product introduction
XBSL type experimental vertical sand pump is used for conveying ore slurry, mud, etc. It can be used in a fixed position or not, but a wooden seat of suitable size must be fixed on the sand pump base, so that it will not turn over when the sand pump moves. The rotation direction of the sand pump is clockwise. When connecting the motor, you must pay attention to the direction to ensure that the impeller rotates correctly. When the sand pump is started, it should be filled with ore slurry or mud. The ore feeding port on the left side of the pump can also be connected to the ore port from the live cover of the pump to discharge the solids in the slurry with a large particle size of 5mm. In order to avoid the ore slurry and the mud sludge, the pipeline and the impeller should be stopped. The ore feeding should be stopped first. And let it continue to run for 2-3 minutes, and at the same time supply clean water to clean it. If the speed is fast when the power is turned off and the operation is stopped, the belt is placed in the small groove of the main shaft pulley and the large groove of the motor pulley.



Product application
Application areas: It can also be used to transport ore slurry and tailings in the laboratory, and can also be used to transport media in coal preparation plants, aluminum plants to transport high-temperature and easy-to-crystallize materials, and cement plants to transport materials.
Equipment model
Model |
Uite |
XBSL13(1/2) |
XBSL19(3/4) |
XBSL25(1) |
XBSL38(3/2) |
Outler diameter |
mm |
13 |
19 |
25 |
38 |
Head |
m |
5 |
6 |
9 |
12 |
Flow rate |
L/min |
20-30 |
55 |
110 |
250 |
Feed density |
% |
30 |
30 |
30 |
30 |
Voltage |
v |
380 |
380 |
380 |
380 |
power |
kw |
0.75 |
1.1 |
1.5 |
3 |
Overall dimensions |
mm |
420/280/460 |
480/350/550 |
680/500/640 |
690/480/680 |
Weighe |
kg |
65 |
110 |
157 |
200 |