Planetary Ball Mill

Product introduction
Equipment introduction: Planetary ball mill is a powerful and fast laboratory sample preparation and high-efficiency equipment, which meets the requirements of high-precision sample grinding. It has the characteristics of short grinding time, high grinding precision, strong maneuverability and safe use.
Our planetary ball mill is small in size, full in function, high in efficiency, low in noise and pollution-free. The equipment is equipped with a vacuum ball mill, which can grind samples in a vacuum state. This machine can be used for dry and wet grinding. The grinding time can be set by itself, and the speed can be adjusted by frequency conversion. The speed accuracy is 0.2 rpm. Particle size, soil material ≤ 10mm, other materials ≤ 3mm, discharge particle size, the minimum can reach 0.1μm micron (even nanometer) ball mill material optional: agate, alumina, corundum ceramics, zirconia ceramics, silicon nitride ceramics, Silicon carbide ceramics, stainless steel, high wear-resistant steel, manganese steel, nylon, PTFE, polyurethane, cemented carbide, crystal glass, etc.: Ball options: agate, alumina, zirconia, silicon nitride, silicon carbide, Stainless steel, high wear-resistant steel, manganese steel, nylon, polyurethane, cemented carbide, etc., the general processing capacity is 30% of the volume/time.



Product application
Application fields: Planetary ball mills are widely used in experimental screening work in the fields of geology, metallurgy, soil, building materials, chemical industry, light industry, medicine, electronics, ceramics, batteries, environmental protection and other fields.
Advantages of the equipment: 1. The gear transmission is adopted, and the gear transmission will not slip, which can ensure the same speed of the four cans! In the case of ball milling the same material, it can ensure that the consistency of the materials in the 4 jars after ball milling is very good! And can ensure that the same material, under the same process, the effect of each ball milling is the same! That is, it has good repeatability and consistency!
2. Fast rotation, large energy, high efficiency and fine granularity
3. One experiment can grind four samples of different sizes and materials at the same time.
4. The ball mill has the functions of frequency conversion, program-controlled stepless speed regulation, etc. The ideal speed is selected according to the test results.
5. Equipped with timing shutdown, automatic timing forward and reverse devices, which can be freely selected according to needs, which is practical and convenient.
6. This machine has the advantages of low center of gravity, good rigidity, compact structure, convenient operation, safety and reliability, low noise, no pollution, and low loss.
Working principle: The planetary ball mill is equipped with four ball mill tanks on a large plate. When the large plate rotates (revolution), the ball mill tank is driven to rotate around its own axis (rotation), thereby forming a planetary motion. The transmission ratio of revolution and rotation is 1:2 (one revolution for one revolution and two revolutions for autorotation). The grinding balls and abrasives in the tank collide with each other, crush, grind and mix the test samples under the action of the two centrifugal forces of revolution and rotation.
Equipment model
Model |
Volume(L) |
Qty(pcs) |
Revolution(rpm) |
Rotation(rpm) |
Motor |
Voltage |
Dimension size(cm) |
Weight |
LZQM0.4L |
0.05-0.1 |
4 pcs |
40-450 |
60-900 |
0.55kw |
220V |
53/30/35 |
45kg |
LZQM1L |
0.05-0.25 |
4 pcs |
40-450 |
60-900 |
0.55kw |
220V |
53/30/35 |
55kg |
LZQM2L |
0.05-0.5 |
4 pcs |
35-335 |
70-670 |
0.75kw |
220V |
75/45/55 |
83kg |
LZQM4L |
0.25-1 |
4 pcs |
35-335 |
70-670 |
0.75kw |
220V |
75/47/57 |
90kg |
LZQM6L |
1-1.5 |
4 pcs |
35-335 |
70-670 |
0.75kw |
220V |
77/47/57 |
95kg |
LZQM8L |
1-2 |
4 pcs |
35-290 |
70-580 |
1.5kw |
220V |
90/60/64 |
136kg |
LZQM10L |
1-2.5 |
4 pcs |
35-290 |
70-580 |
1.5kw |
220V |
90/60/46 |
145kg |
LZQM12L |
1-3 |
4 pcs |
35-290 |
70-580 |
1.5kw |
220V |
90/60/46 |
150kg |
LZQM20L |
2-5 |
4 pcs |
25-215 |
50-430 |
4kw |
380V |
120/76/64 |
430kg |
LZQM40L |
5-10 |
4 pcs |
20-195 |
40-390 |
5.5kw |
380V |
140/85/103 |
665kg |
LZQM60L |
10-15 |
4 pcs |
27-174 |
40-260 |
7.5kw |
380V |
160/950/112 |
865kg |
LZQM100L |
20-25 |
4 pcs |
27-160 |
40-240 |
11kw |
380V |
175/114/133 |
1210kg |