Product introduction
This spiral chute is made of fiberglass steel with rubber coating. Compare to normal spiral chute, this spiral chute is integrated moulding, and it has obvious effect on anti-corrosion and wear resistance. It has been widely used in to enrichment the particle size 0.5-0.02mm fine grain like iron, tin, chrome, tungsten, gold, and other low-grade ores or non-metallic minerals.
Features of spiral chute
1. Reasonable structure and small occupation area.
2. High recovery, high efficiency, and precise separation.
3. Non-required power.
4. Light in weight, anti corrosion, rust and wear resistant.
5. Simple installation and Minimal maintenance requirement.
6. Low operating cost and long working life.
7. Reliable running with minimal operator attention.
8. Strong adaptability to fluctuation of feeding amount, density, size and grade.
Equipment model
Model | 5LLX-1200 | 5LL-1200 | 5LL-600 |
Main Material | Fiberglass | Nylon PA6 | Fiberglass |
Outer Diameter(cm) | 1200 | 1200 | 600 |
Inner Diameter(cm) | 200 | 216 | 114 |
Spiral Head(piece) | 2 | 2 | 2 |
Spiral Pitch | 600-630 | 600 | 320/370/430 |
Feeding Size (mm) | 0.02-0.5 | 0.03-0.5 | 0.02-0.3 |
Feeding Density | 20-55% | 25-50% | 20-50% |
Lateral Inclination | 9° | 9° | 10° |
Cylinder Number | 10 | 8 | 10 |
Capacity (t/h) | 2-4T/h | 3-5T/h | 0.8-1.2T/h |
Width(cm） | 120/210/140 | 110/110/250/ | 110/280 |
Height(cm） | 3500 | 3100 | 2650 |
Weight(kg) | 125kg | 115kg | 60kg |