Product introduction
Wet mill full name wet mill, according to the different operation mode, divided into gold mill, mercury mixing mill, iron mill, electric mill; According to the different structure, it is divided into wheel roller, double – roller, three – roller roller. Wet mill is based on the ancient stone mill, through the improvement of modern development. It is used for grinding operations of all kinds of ferrous metals, non-ferrous metals, non-metallic minerals, as well as grinding, separation and processing operations of rare metal gold and silver. It is the best first grinding equipment for the majority of small and medium-sized concentrators and flour mills.



Product application
Working principle: The equipment is mainly composed of power device, frame, birdbine, roller, roller plate and other components, and adopts wheel grinding working mode: Firstly, the motor drives the power to the reducer. Driven by the reducer, the torque is transmitted to the upper horizontal axis through the large vertical shaft, and then transferred to the rolling wheel through the tie rods installed at both ends of the horizontal axis, so that the rolling wheel generates the driving force and rotates counterclockwise along the horizontal axis. When working, the roller can not only rotate around the large vertical axis of the wet roller, but also rotate around the central axis of the roller, while the roller plate is fixed. The ore material added in the mill is subjected to the extrusion pressure brought by the weight of the wheel itself, and the huge friction caused by the rotation and rotation of the wheel and the rolling plate. After repeated extrusion, rubbing and grinding, it is completely crushed.
At the same time of rolling and rubbing minerals, the wheel has the function of mixing and stirring pulp making, fully mixing the material and water, so that the pulp concentration and other grinding indexes are stable; After grinding and crushing, the monomer dissociated mineral fine particles are brought to the upper level of the liquid in the mixed slurry. The overflow discharge port is arranged on the birdbine, and the overflow discharge is discharged into the next operating procedure. Coarse mineral is settled in the bottom of the rolling plate, continue grinding grinding, until the fineness of the standard; Set in the basin discharge port screen (screen mesh number, should be based on the mineral type, sorting requirements, reasonable Settings), can strictly control the classification of particle size, to avoid mineral crushing or uneven particle size phenomenon, to create good conditions for subsequent operations.
Equipment model
Model | Specification | Input size | Rotate Speed | Powder |
LZ1600 A | 1600×400×200×500±20mm | <30 mm | 20-22 r/min | Y6L-30KW |
LZ1500 A | 1500×350×200×460±20mm | <30 mm | 20-22 r/min | Y6L-22KW |
LZ1500 B | 1500×350×150×460±20mm | <30 mm | 20-22 r/min | Y6L-22KW |
LZ1500 C | 1500×300×150×420±20mm | <30 mm | 20-22 r/min | Y6L-22KW |
LZ1400 A | 1400×250×150×350±20mm | <30 mm | 16-18 r/min | Y6L-18.5KW |
LZ1400 B | 1400×250×150×350±20mm | <30 mm | 21-23 r/min | Y4L-18.5KW |
LZ1350 A | 1350×250×150×350±20mm | <30 mm | 16-18 r/min | Y6L-18.5KW |
LZ1350 B | 1350×250×150×350±20mm | <30 mm | 21-23 r/min | Y4L-18.5KW |
LZ1300 A | 1300×250×150×350±20mm | <30 mm | 16-18 r/min | Y6L-15KW |
LZ1300 B | 1300×250×150×350±20mm | <30 mm | 21-23 r/min | Y4L-15KW |
LZ1200 A | 1200×220×80×270±20mm | <25 mm | 17-19 r/min | Y6L-7.5KW |
LZ1200 B | 1200×200×80×250±20mm | <25 mm | 23-25 r/min | Y4L-7.5KW |
LZ1100 A | 1100×200×80×250±20mm | <25 mm | 17-19 r/min | Y6L-7.5KW |
LZ1100 B | 1100×200×80×250±20mm | <25 mm | 23-25 r/min | Y4L-7.5KW |
LZ1000 | 1000×200×80×250±20mm | <25 mm | 13-15 r/min | Y4L-5.5KW |