20 1月 2024

Principle & Application of Water Jacket centrifuge Concetrator

Water jacket centrifuge is a machine that uses centrifugal force to separate the components of liquid and solid particles or a mixture of liquid and liquid. Centrifuge is mainly used to separate the solid particles in the suspension from the liquid, or to separate two different densities in the emulsion, but not mutually soluble liquids (such as separating cream from milk); It can also be used to remove liquids from wet solids, such as drying wet clothes in a washing machine; Tershu’s ultrafast tube separator can also separate gas mixtures of different densities; Using the characteristics of different density or particle size of solid particles settling at different rates in the liquid, some sedimentation centrifuges can also classify solid particles according to density or particle size.

The solid phase impurities in the liquid are separated by the machine to achieve the effect of clarification. Used to separate all kinds of difficult to separate suspension. Bie is suitable for solid-liquid separation with small concentration and large viscosity, fine solid particle and small solid-liquid weight. The solid phase should be removed after shutdown.

The main disadvantage of tubular centrifuge is intermittent operation. The drum volume is small. Frequent shutdowns are required to remove sediment. Therefore, it is necessary to strengthen the separation performance of tubular centrifuge by strengthening the separation theory research and centrifugal separation process research.

The application range of water jacket centrifuge is very wide, and it is very effective for the separation of heavy substances and lighter substances such as gold, silver, copper, tin, etc. Precautions for the use of water jacket centrifuge: Check whether it meets the working requirements before starting, whether there are loose parts, and whether there is friction in the inner liner rotation. When the machine is started, the first empty car test, close the cabin door, start and run for five minutes, check the stability of the equipment. Turn on the pump and adjust the proper water pressure. 

Always pay attention to the sound of the machine when it is running, whether there is an anomaly. Regular addition of grease, etc. After shutdown, it is necessary to clean up the boredom in the equipment in time, clean it with high pressure water, and pay attention to lubrication and moisture-proof maintenance when the equipment is idle.

发表回复

您的电子邮箱地址不会被公开。 必填项已用*标注