
Product introduction
Ore washing machine is a large equipment used to wash ore in black and non-ferrous metallurgical mines, iron and steel, metallurgy, chemical industry and building materials, which is divided into two categories: spiral ore washing machine and cylinder ore washing machine. Washing is the process of removing the clay material in the ore. It is widely used in the ore washing and desliming industry of phosphate ore and iron ore. It is set before crushing, gravity separation, magnetic separation and flotation operations to eliminate the influence and harm of sludge on these operations, improve operation efficiency and obtain good separation indexes. The ore washing machine is a large equipment used for washing ore and stone in black and non-ferrous metallurgy mines, iron and steel, metallurgy, chemical industry and building materials. The large processing capacity of the ore washing machine is the ideal equipment for enterprises that meet the requirements of the cleanliness of ore and stone with high productivity. The ore washing can avoid the mud material in the mud mineral raw material blocking the crushing and screening equipment. The raw material containing soluble useful or harmful components should also be washed.



Product application
The cleaning cylinder is supported by four tugs, the motor drives the reducer, and the large and small gears drive the cleaning cylinder to rotate at low speed. Containing mud pie and aggregate the inlet into the powder, into the rotating drum, cleaning Angle are installed in the cylinder of wear-resisting rubber lining board kept bringing up the fall, the feeding end to discharging end mobile many times in the process of circulation, and the forward or reverse flushing water washing washing, clean the aggregate after discharge end of the drum sieve sieve dehydration back out. The wastewater containing the sludge is discharged through the discharge or feeding end with a hole baffle.
Spiral ore washing machine is suitable for iron, manganese, limestone, tin ore and other ores with more mud content before beneficiation to clean sediment, can be stirring, washing, separation, desliming of minerals. Also suitable for construction, power station and other engineering stone cleaning, washing water pressure <147-196kpa.
The spiral ore washing machine uses the buoyancy of water to separate dust and impurities from sand. After the agitation of the spiral sheet, the water can be filtered to remove impurities, and the purpose of improving transportation is achieved. And in the process of ascension, mixing work was also carried out. Is the sand to achieve uniform mixing, no fine sand, coarse sand.
The spiral ore washing machine has a long helix, good sealing system, simple structure, strong processing ability and convenient maintenance. Characteristics of sand water content, mud content and so on. Widely used in a variety of ore mining industry.
Equipment model
Model | Spiral Dia.(mm) | Rotating Speed (r/min) | Feeding size(mm) | Tank slope(o) | Output (t/h) | Power (Kw) | Weight (t) |
2LZXL320 | Φ320×3200 | 28 | ≤30 | ≤12 | 10 | 4 | 0.9 |
2LZXL400 | Φ400×4600 | 23 | ≤30 | ≤12 | 20 | 5.5 | 1.9 |
2LZXL540 | Φ540×4600 | 23 | ≤30 | ≤12 | 25 | 7.5 | 3.9 |
2LZXL540 | Φ750×6000 | 22 | ≤30 | ≤12 | 35 | 11 | 5 |
2LZXL750 | Φ750×7600 | 22 | ≤70 | ≤12 | 50 | 15 | 7.5 |
2LZXL800 | Φ800×7600 | 22 | ≤70 | ≤12 | 70 | 15 | 9.5 |
2LZXL914 | Φ914×7600 | 21 | ≤70 | ≤12 | 100 | 22 | 12.9 |