Portfolio

Product introduction

The series of resistance furnace is a batch type, for laboratory, industrial and mining enterprises, scientific research units for elemental analysis of heat treatment determination and general small steel parts quenching, annealing, tempering heating. The rated temperature box type resistance furnace at a temperature of 300 DEG C, can be used as alloy steel heat treatment and metal melting, sintering, high temperature heating analysis etc.It is a kind of ideal has broad prospects drying equipment, such as laboratory to try drying, heat treatment, baking, melting wax, sterilization and heating, but do not apply to the volatile, flammable and explosive items, lest cause explosion.

Product application

 

The following is the general principle of drying machine selection, it is difficult to say which or which is the most important, the ideal selection of electric blast drying oven must be focused on according to their own conditions, sometimes the compromise is necessary. 

Applicability ——- The drying device must first be suitable for specific materials, and meet the basic use requirements of drying materials, including good handling of materials (feed, transport, fluidization, dispersion, heat transfer, discharge, etc.), and can meet the basic requirements of handling capacity, water removal, product quality, etc. 

High DRYING RATE — ONLY IN terms OF drying rate, CONVECTION drying MATERIALS ARE HIGHLY DISPERSED IN HOT air, CRITICAL MOISTURE content is low, drying speed is fast, and the same IS CONVECTION drying, drying methods are DIFFERENT critical MOISTURE content is different, so the drying rate is also different. 

Low energy consumption ——- Different drying methods have different energy consumption indexes. The thermal efficiency of general conduction drying can reach 100% theoretically, but only about 70% for flow drying. 

Save investment —– to complete the same function of the drying device, sometimes its cost is different, should choose the lower choice. 

Low operating cost — equipment depreciation, energy consumption, labor costs, maintenance costs, spare parts costs… Electric heating air drying oven and other operating costs should be as low as possible. 

The drying device with simple structure, sufficient supply of spare parts, high reliability and long life is preferred. 

Meet the requirements of environmental protection, good working conditions, high safety. 

It is best to make drying experiment of materials before selection, and have a deep understanding of drying devices (advantages and disadvantages) that have been used for similar materials, which is often helpful for appropriate selection. 

Instead of relying solely on past experience, focus on absorbing new technologies and listening to experts. 

 

Equipment model

 

Model

Voltage

V

Heater KW

temperature ℃

Work size mm

Weight

KG

 

 

 

 

L

W

H

 

LZ101-1

220

2.5

50~300

350

450

450

70

LZ101-2

220

3.2

50~300

450

550

550

100

LZ101-3

220

6

50~300

500

600

750

140

LZ101-4

3X380

9

50~300

800

800

1000

350

LZ202-0

220

1.2

50~300

250

250

250

40

LZ202-00

220

2

50~300

350

350

350

50

LZ202-1

220

2.5

50~300

350

450

450

60

LZ202-2

220

3.2

50~300

450

550

550

80

LZ202-3

220

6

50~300

500

600

750

130

LZ202-4

3X380

9

50~300

800

800

1000

330