
Product introduction
The chute feeder can be set up on the ground or hoisted on the discharge port of the mine bin. The bottom plate of the groove is reciprocated with a stroke of 20-60 times /min and a stroke of 20-200mm. The stroke can be properly adjusted by the eccentric wheel of the driving device, and the eccentricity is half of the stroke.
According to the production practice of some concentrators, for viscous ores, the eccentricity should not be less than 30mm. The slot width of the trough feeder is about 2-2.5 times the maximum particle size of the feed. The largest trough feeder, can meet the size of less than 500mm iron ore feeding. The most commonly selected specification is 980*1240 trough feeder, its feeding particle size is 350-0mm, suitable for 400*600 jaw crusher feeding equipment.



Product application
1.Can be used in ore beneficiation, coal, chemistry and other industrial departments
2.Conveying granular and bulk materials from storage bin to different receiving devices
3.Unsuitable for conveying concentrate powders or other powdery materials.
4.Can be worked as ball mill and belt conveyer to continuously and evenly supply granular to material receiving devices
Equipment model
Model |
Feeder size (mm) |
Swinger Frequency (r/min) | Swinger (mm) |
Capacity (t/h) | Motor (kw) | Dimensions(cm) | Weight (kg) |
LZC400/400 | 100 | 18.8 | 12 | 3-25 | 1.1 | 235/72/62 | 535 |
LZC600/500 | 200 | 38.9 | 10-50 | 10-50 | 4 | 275/91/85 | 1054 |
LZC980/1240 | 350 | 23.7 | 20-50 | 36-90 | 7.5 | 284/118/128 | 1676 |
LZC1000/1900 | 300 | 27 | 30-125 | 300 | 7.5 | 390/159/135 | 2691 |