Vertical composite crusher

Vertical Composite Crusher

Product introduction

The vertical shaft crusher is controlled by a frequency converter, and the discharge granularity can be adjusted arbitrarily, which is not affected by the wear of the plate hammer and the lining plate; there is no screen bar setting, and it is not easy to block when crushing materials with high moisture content and large mud content; the elastic adjustment mechanism is adopted , the unbreakable material can be automatically discharged without causing damage to the equipment; the bearings are arranged horizontally and have a long service life, and can crush materials with high temperature (such as cement clinker); the vertical shaft sand making machine has an ingenious structure, easy maintenance, and no lifting equipment. , you can easily replace the wearing parts.

Vertical composite crusher-1
Vertical composite crusher-2
Vertical composite crusher-3

Product application

Application areas: mining, metallurgy, refractory, cement, coal, glass, ceramics, electric power and other industries.

Application materials: limestone, quartz stone, granite, dolomite, iron ore, coal gangue, river pebble, weathered rock, soft rock, etc.

Equipment advantages: 1. No sieve plate setting. Materials with a large amount of sediment will not be blocked, and unbreakable materials can be automatically discharged into the body without causing damage to the equipment.

2. The crushed material is direct current, and the production efficiency is high.

3. Fewer wearing parts and easy maintenance, and the damaged parts can be easily replaced by opening the working compartment door.

4. Good sealing, stable operation and less dust.

5. Low energy consumption.

Working principle: The material enters the vertical shaft crusher from the feeding hopper, falls vertically from the feeding port, part of the falling material is dispersed by the high-speed rotating distributor, and collides with the inner lining plate of the equipment for crushing, and another part of the material falling vertically can directly contact the first crusher. The layer hammer head is crushed, and collides with the material separated by the distributor to crush the stone to make sand. During the crushing, it impacts on the inner material lining, is rebounded by the material lining, and impacts the second layer of the hammer head and changes its movement. direction, so that the material hits the inner material lining plate at a high speed and falls vertically to form a continuous material curtain like collision to make sand, so that a piece of material is subjected to multiple machine-beating and stone-beating sand making in the vortex crushing chamber. After the process reaches the appropriate particle requirements, the fourth-layer hammer head is used for shaping work to meet the final needs of customers, and the final shaped finished materials are discharged through the lower discharge port.


Equipment model


Feeding Size



Speed Of Eccentric Shaft(r/min)

Motor Power(kw)






<70 mm

<5 mm 60-90%

5-15 t/h

934 r/min

22 kw




<100 mm

<5 mm 60-90%

10-30 t/h

769 r/min





<120 mm

<5 mm 60-90%

20-60 t/h

530 r/min

110 kw




<150 mm

<5 mm 60-90%

30-80 t/h

495 r/min

132 kw




<170 mm

<5 mm 60-90%

100-150 t/h

424 r/min

160 kw




<200 mm

<5 mm 60-90%

60-130 t/h

370 r/min